Hand Seamer In Stock Now

Malco Hand Seamers, with forged steel jaws, are the premier choice for bending, folding, flattening and straightening sheet metal edges or safely gripping and moving sheet metal around the job site.  These seamers are available in 3 inch (76.2 mm) jaw widths as well as an offset 3 inch (76.2 mm) size for overhead work.  The drop-forged, high-impact jaws feature depth markings graduated in 1/4 inch (6.4 mm) increments and are complimented by a powerful compound leverage design.  Easily bend flanges or completely flatten seams from 1/4 to 1-1/4 inch (6.4-31.8 mm) deep in 24 gauge (0.71 mm) galvanized or (0.61 mm) mild steel.

This tool is rated for a maximum of 24ga sheet metal

Please use the proper PPE with the correct safety ratings for the work you’re performing. This includes, but is not limited to, safety glasses, face shields, ear plugs, dust masks, close-toed shoes, and other proper attire. Never wear baggy clothes, jewelry, or have long hair down and unsecured while operating a tool.

Please note that you can only renew a tool once, and after 14 days the tool must be returned back into stock in order to let other people have a chance to use it. Users who renew tools for an additional 7 days will need to wait at least one week before checking that tool out again. Renewal of tools can be done between days 5-7 of your rental as long as another customer does not have the tool reserved during that time.

Please be sure to return tools on your listed due dates to avoid service interruptions to other customers. If a customer has a history of late returns, we may put your account on probation until good customer standing can be reinstated. 

Users who pose problems with timely returns, or problematic behaviors such as circumventing bans or our terms of service in any way may be subject to denial of service without warning or explanation.