12.5 ft. Telescoping Extension Ladder In Stock Now

The Xtend+Climb Pro Series Ladder 12.5ft, Type IA 300lbs capacity.

Instructions

Extending the Ladder

1.       Release the strap that secures ladder in its “storage configuration”.

2.        

a)       Place ladder on firm level surface.

b)      Place your foot on the bottom rung to hold ladder in place.

c)       With both hands, pull up on the couplings of the 3rd rung (as seen in the ladder diagram) from the bottom.

d)      Make sure that each rung is pulled up to its full extension and locks before attempting to extend the next rung. The green dot will be visible when the lock is engaged. Both locks must be engaged on each rung.

e)      Extend desired number of rungs to achieve required height.

f)        Do not stand or step on any rungs within 3 feet of the top of the ladder.

g)       Do NOT climb higher than any rung that is not fully open. Keep retracted rungs at the top of the ladder.

Closing the Ladder

Great care should be used inclosing the ladder. Do not place any part of the body including hands, fingers, or thumbs on or between rungs or couplings above the closing rung.

TIP: Please remember that just as the ladder extends and locks in one foot increments, it also closes in one foot increments. Each rung closes by simultaneously pushing the latches on the previous, lower rung inward towards one another.

Starting at the highest extended rung, please close each rung by securely placing your thumbs on the latches below the rung that you are closing. Please make sure that the rest of your hand is below the plastic coupling of the rung.

Step by step:

1)      Grasp the ladder by the couplings below the rung that you are activating the latches.

2)      Place thumbs on latches that you wish to disengage.

3)      Place the rest of your hand below the coupling.

4)      If you place the rest of your hand above the coupling – your hand could be pinched between the rungs.

5)      Place your thumb on the release mechanism located on the second rung from the bottom of the ladder.

a.       Depending on the rung either push each unlocking mechanism to the lower previous rung or push the lever upward to lower the previous rung.

6)      Repeat this operation for each rung.

Please use the proper PPE with the correct safety ratings for the work you’re performing. This includes, but is not limited to, safety glasses, face shields, ear plugs, dust masks, close-toed shoes, and other proper attire. Never wear baggy clothes, jewelry, or have long hair down and unsecured while operating a tool.

Please note that you can only renew a tool once, and after 14 days the tool must be returned back into stock in order to let other people have a chance to use it. Users who renew tools for an additional 7 days will need to wait at least one week before checking that tool out again. Renewal of tools can be done between days 5-7 of your rental as long as another customer does not have the tool reserved during that time.

Please be sure to return tools on your listed due dates to avoid service interruptions to other customers. If a customer has a history of late returns, we may put your account on probation until good customer standing can be reinstated. 

Users who pose problems with timely returns, or problematic behaviors such as circumventing bans or our terms of service in any way may be subject to denial of service without warning or explanation.